Grease interceptor cleaning in columbus
Columbus Grease Interceptor Cleaning
Grease Interceptor Cleaning Services in Columbus
One everyday misunderstanding we hear a lot is that grease traps and grease interceptors are the same. Although both these units perform the same valuable job of trapping grease, they differ in several ways. A grease trap is installed underneath the sink, while grease interceptors are often found underground outside your kitchen. Large commercial kitchens or kitchens that use a lot of greases are required to install grease interceptors, which have a larger capacity of 750 to 4000 gallons. Smaller commercial kitchens, though, can install grease traps that have low capabilities, but this is something only the authorities can determine.
When it comes to the performance of grease interceptors, a lot hangs on the way it is installed. Before installation, a thorough inspection is conducted that helps determine the best procedure considering several factors. Not all contractors do an excellent job of installation, and if you happen to hire a cheap company, the performance of your grease interceptor can drop to only 30%. This is why you need to do your homework and only work with professional contractors who know what they are doing. An adequately installed interceptor can function at a maximum efficiency of up to 85%. Still, no matter how well your interceptor is installed, proper cleaning and maintenance are necessary. Without proper cleaning, your interceptor will start to fail.
Experts in the field also recommend using a hydro-jet cleaning service at least once a year. This technology gets rid of the stubborn sludge stuck to the edges of your interceptor. The more often you get rid of this sludge, the better your interceptor will work. An interceptor that is performing well ensures that your grease never reaches the sewer lines.
How are grease trap pumping and cleaning performed?
Grease Interceptor Cleaning Columbus – Compared to a grease trap, a grease interceptor is a little more complicated in design. For example, a grease interceptor has interconnected compartments underground that each has a manhole for easy access. This set-up makes it easier for the pumping and cleaning crew to do their job and reach difficult areas. However, the network of compartments also means there are a lot of places where sludge can accumulate. The walls, crevices, and bottom of the interceptor chamber are common locations for sludge build-up. If this happens, no amount of pumping will be enough to get rid of the stubborn grease, and you will need a specialized company like ours to come to your aid.
The first step in cleaning grease interceptors is getting rid of all the grease from the chambers. The equipment we use will depend on the size of your trap and the amount of oil we need to extract. After an initial inspection, our team can identify the right equipment to use for the job.
The next step is removing the stubborn sludge from the hard-to-reach areas of your chambers. Our company is among the few who have hydro-jet technology to blast away sludge from all the nooks and crannies of your interceptor. After this step, you will notice a big difference in the appearance of your grease interceptor.
Columbus Grease Trap Cleaning Service has invested in hydro-jet technology to ensure that we do our job thoroughly and completely. Many cheap grease trap contractors don’t have such equipment and often skip this vital step. By leaving the sludge and just pumping out the grease, your interceptor will continue to decrease in its performance. True, their services may be cheaper, but in the long run, you will be faced with a host of issues that could have been prevented by using our hydro-jet services. Our team of experts are the best at what they do and never leave any grease behind.
Your grease interceptor capacity
The standard grease interceptor has a capacity of 750 gallons, but there are newer, bigger models that can hold far more grease. Nowadays, you can find interceptors that can hold up to 4000 or 5000 gallons of oil, something all fast food joints in Columbus require. The bigger your grease interceptor, the better and the less frequency of pumping.
Grease interceptors use a simple principle of weight and viscosity to separate the FOG from wastewater. Since each contaminant has specific weight and thickness, they settle down at different levels. Once the FOG is settled, the water can continue its way to the sewer system free from any oil or other contaminants. Once you have a grease interceptor, it is your job to monitor the level of waste regularly and get rid of it before it overflows. Monitoring the levels of oil will help you determine when you need to call a grease pumping service.
After installation, you may need a few months to help you determine how regular you need pumping. Once you have a schedule of cleaning and pumping, make it a point to stick to this schedule even if you feel your interceptor has not reached maximum capacity.
Our team at Columbus Grease Trap Service can help you come up with the best maintenance schedule for your interceptor. The program we recommend will always comply with the local standards. In Columbus, OH, the allowable grease interceptor capacity is 30%, which means you will need to call us before your interceptor reaches this limit. Don’t search in Google for experts, just call us now!
GET A GUARANTEED CALL BACK FROM THE OWNER
Affordable & Reputable Grease Trap Services